

Fallkniven SK1 Jarl Fixed Blade (Curly Birch Handle)
RM1,885
RM2,217
Jarl – is as Earl or Duke, a title used by the most powerful officer in Sweden. The classic clean lines discern a philosophy that honors the skill and experience of the mind, where the tool is allowed to play its part but to outshine the one that holds the handle – the perfect combination. So it is with Jarl and Juni, Fallkniven new sheath knives. Handles of rich curly birch, solid nickel silver fittings and sharp blades of laminate powder steel. Open, low-hanging black leather sheath, for easy access.
Features:
Overall Length: 8.27"
Blade Length: 3.8"
Blade Thickness: 4.5mm
Steel: 3G
Hardness (HRC): 62
Edge: Convex
Tang: Protruding broad tang
Handle Material: Curly birch
Finger Guard: Nickel Silver
Sheath: Leather
Weight (Knife Only): 138g
Country of Origin: Sweden
See in the official website: https://fallkniven.se/en/knife/sk1l-2/


Fallkniven PHK Professional Hunter Fixed Blade (Thermorun Handle)
RM1,865
RM2,195
The Fallkniven Professional Hunter’s Knife (PHK) is one of the best hunting knives in the world. Hunting leaves little room for error when function, safety and hygiene are top priorities. The special blade design, called an upsweep-drop point, offers an effective skinning edge yet without the problems common to wide-bladed dedicated skinning knives. The 3G stainless laminate powder steel (VG2-SGPS-VG2) provides a blade that is incredibly strong and it keeps a sharp edge extremely well. The combination of a thermorun handle and a stainless steel crossguard makes this fixed blade both safer to use and comfortable for long and hard game processing work. It includes an injection-molded Zytel sheath for a functional, safe and strong combination of qualities when carrying the knife. The sheath design is hygienic, easy to clean, and securely contains the knife both with friction and a webbing snap loop.
Features:
Overall Length: 9.5"
Blade Length: 4.88"
Blade Thickness: 5mm
Steel: 3G
Hardness (HRC): 62
Edge: Convex
Tang: Protruding broad tang
Handle Material: Thermorun
Finger Guard: Stainless Steel
Sheath: Zytel
Weight (Knife Only): 199g
Country of Origin: Sweden
See in the official website: https://fallkniven.se/en/knife/phkz/


Fallkniven SK2L Embla Fixed Blade (Desert Ironwood Handle)
RM1,599
RM1,882
The Fallkniven Embla is a beautiful hunting knife that follows the basic principles of Swedish minimalism – which is simple, neat and functional.
The satin-finished laminated cobalt steel, which is renowned for its ability to take and keep an excellent edge. The edge is convex, the sharpest/strongest edge construction. Its handle is desert ironwood, an extremely hard and compact wood, so dense that it does not float in water. It can be treated with furniture polish or other oil. This protruding broad tang fixed blade includes a black, low-hanging leather sheath that houses the knife securely when not in use.
Features:
Overall Length: 8.25"
Blade Length: 4"
Blade Thickness: 4.5mm
Steel: Laminated Cobalt Special Steel
Hardness (HRC): 60
Edge: Convex
Handle Material: Desert Ironwood
Finger Guard: Stainless Steel
Sheath: Black Leather
Weight (Knife Only): 164g
Country of Origin: Sweden
See in the official website: https://fallkniven.se/en/knife/sk2l/


Fallkniven S1 Pro 10 Fixed Blade (Lam. CoS Steel)
RM1,599
RM1,885
The F1, S1 and A1 fixed blades are basic survival knives for professionals that offer exceptional service for more than 20 years. And due to their outstanding quality and durability, they will continue to perform for many more years and continually improve to develop the new Pro Series.
The original laminated VG-10 steel is upgraded to a laminate cobalt steel (lam. CoS) blade that ensures a durable edge and improved edge retention. The satin-finished blade is also thicker increasing the torsional rigidity to withstand even greater external forces. The full-length tapered tang is wider and thicker. The crossguard is now made of stainless steel and permanently welded to the tang. The convex blade edge has been refined to improve its cutting properties. The Zytel sheath is also redesigned to be more durable, and better suited for the Molle attachment system.
Features:
Overall Length: 9.75"
Blade Length: 5"
Blade Thickness: 6mm
Steel: Laminated Cobalt
Hardness (HRC): 60
Edge: Convex
Tang: Protruding Broad Tang
Handle Material: Black Thermorun
Sheath: Black Zytel
Weight (Knife Only): 257g
Lanyard Hole
Country of Origin: Sweden
See in the official website: https://fallkniven.se/en/knife/s1pro10/


Kansept K1024A3 Kratos Titanium Timascus Inlay
RM1,459
DESIGN
Designed by Ostap Hel, a full-time designer, and custom knife and gear maker from Poland. All his designs are based on basic geometry, smooth transitions, and the Golden Ratio concept. He always tries to experiment with new shapes and ideas to fit his the company's unique style and manufacturing capabilities. The Kratos, son of the titans, represent strength and power and were inspired by an ancient Greek sword called Kopis. This framelock folder is equipped with a stonewashed CPM-S35VN blade that delivers solid cutting performance in outdoor and urban environments alike. Besides, it also features an aesthetic titanium handle with timascus inlays and a 3D milled titanium pocket clip.
FEATURES
Ergonomic titanium handle with timascus inlays for a smooth gripping surface that is comfortable in the pocket or hand.
Stonewashed CPM-S35VN blade steel offers a tough blade with excellent edge retention.
Ceramic ball bearing offers a smooth flip opening.
Milled pocket clip is strong and holds the knife securely.
SPECIFICATIONS
Overall Length
8.69"/220.6mm
Blade Length
3.79"/96.3mm
Blade Thickness
0.157''/4.0mm
Blade Material
CPM-S35VN
Blade Style
Clip point
Blade Grind
Compound
Blade Finish
Stonewashed
Handle Material
Titanium, Timascus
Color
Timascus
Lock Type
Frame Lock
Weight
5.7oz/163g
Model Name
Kratos
Model Number
K1024A3
Designer
Ostap Hel Design


Zero Tolerance 0223
RM1,434
Designed by Tim Galyean, who inspired by the heritage of classic military knives, this ZT0223 folder has a clip-point blade with heavy jimping on the spine and a cutout to decrease weight. CPM 20CV blade steel provides exceptional hardness, wear resistance and edge retention. Its black DLC coating on blade and titanium handle protects, enhances performance, gives non-reflective finish. A series of decorative holes drilled in the ricasso echo the jimping and add subtle details to this amazing knife. The steel pivot nut and screws with black-oxide finish, titanium pocketclip with bead-blasted finish, aluminum backspacer with black Teflon finish.
Features:
Made in the USA
Opening Action: Manual KVT ball bearings with Flipper
Lock Type: Titanium frame lock, hardened steel lockbar insert
Pocketclip: Reversible (right/left, tip-up)
Steel: CPM 20CV
Handle: Titanium, Brown&Black G10 overlay
Blade Length: 3.5 in. (8.9 cm)
HRC: 60–62
Blade Finish: DLC coating
Blade Thickness: 0.156 in. (0.4 cm)
Closed Length: 5 in. (12.8 cm)
Overall Length: 8.6 in. (21.8 cm)
Weight: 4.7 oz. (134 g)
See in the official website: https://zt.kaiusa.com/0223.html


Fallkniven TH1 Taiga Hunter 1 Fixed Blade (Desert Ironwood Handle)
RM1,380
RM1,624
The Fallkniven TH1 Taiga has a strong blade in laminated cobalt steel that holds the edge very well without being brittle. The reason is fine, well heat treated and tempered steel but also the convex-shaped edge that is not only strong but also wood-sharp. The ergonomic shape of the desert ironwood handle gives a secure grip regardless of weather and wind. Like all natural materials, it varies in texture and color, making each knife an individual creation. It is a full tang blade as the blade goes full width through the handle results in very strong and reliable construction and giving a comfortable weight to the knife. The included black Zytel sheath with a specially designed locking system ensures that the knife is properly locked when it is placed in the sheath.
Features:
Overall Length: 7.5"
Blade Length: 3.5"
Blade Thickness: 4.5mm
Steel: Laminated Cobalt Special Steel
Hardness (HRC): 60
Edge: Convex
Handle Material: Desert Ironwood
Sheath: Black Zytel
Weight (Knife Only): 149g
Country of Origin: Sweden
See in the official website: https://fallkniven.se/en/knife/th1/


Fallkniven F1 Pro 10 Fixed Blade (Lam. CoS Steel)
RM1,319
RM1,554
The Fallkniven F1 Pro 10 is upgraded to a laminate cobalt steel (lam. CoS) blade that ensures a durable edge and improved edge retention. The blades are thicker increasing the torsional rigidity so the knives will withstand even greater external forces. The full-length tapered tang is wider and thicker and therefore significantly stronger. Besides, the crossguard is now made of stainless steel and permanently welded to the tang. The convex blade edge has been refined to improve its cutting properties. Comes with a Zytel sheath which is redesigned to be more durable, and better suited for the Molle attachment system.
Features:
Overall Length: 8.54"
Blade Length: 4"
Blade Thickness: 5mm
Steel: Laminated CoS
Hardness (HRC): 60
Edge: Convex
Tang: Protruding Broad Tang
Handle Material: Thermorun
Sheath: Black Zytel
Weight (Knife Only): 176g
Finger Guard: Stainless Steel
Country of Origin: Sweden
See in the official website: https://fallkniven.se/en/knife/f1pro10/


Kansept K1028A3 Bulldozer Blue Titanium Timascus
RM1,249
DESIGN
Designed by Kim Ning, this K1028A3 Bulldozer is a front flipper with a CPM-20CV Sheepsfoot blade. Its blue anodized titanium and timascus handle has a timascus clip. The ceramic ball bearings offer an easy opening and smooth closing.
FEATURES
Striking blue anodized Timascus handle scales for a sturdy feel.
Flat ground and stonewashed CPM 20CV steel blade for high-performance edge retention.
Timascus show side scale and pocket clip.
Front Flipper deployment.
SPECIFICATIONS
Overall Length
8.2"/208.6mm
Blade Length
3.53"/89.67mm
Blade Thickness
0.14"/3.5mm
Blade Material
CPM-20CV
Blade Style
Sheepsfoot
Blade Grind
Flat
Blade Finish
Stonewashed
Handle Material
Titanium, Timascus
Color
Blue
Lock Type
Frame Lock
Weight
4.48oz/127g
Model Name
Bulldozer
Model Number
K1028A3
Designer
Kim Ning


Kansept K1006A4 Shard Gray Titanium Timascus
RM1,249
DESIGN
This K1006A4 Shard is outfitted with a bead blasted titanium handle with timascus overlays and a gray anodized Wharncliffe blade. The blade is made from premium CPM-S35VN stainless steel with a flipper opener and elongated thumb hole to accommodate easy ambidextrous deployment. The contoured frame lock handle is built with 6AL4V titanium for maximized strength and durability. It also features a 3D milled timascus pocket clip for both aesthetics and easy carry.
FEATURES
Gray anodized CPM-S35VN blade steel offers a tough blade with excellent edge retention.
Chamfered titanium handles with timascus overlays for a smooth gripping surface that is comfortable in the pocket or your hand.
Ceramic ball bearing gives smooth flip opening
Timascus 3D milled titanium pocket clip
SPECIFICATIONS
Overall Length
7.96"/202.1mm
Blade Length
3.50"/88.9mm
Blade Thickness
0.15"/4mm
Blade Material
CPM-S35VN
Blade Style
Wharncliffe
Blade Grind
Flat Grind
Blade Finish
Satin
Handle Material
6AL4V Titanium, Timascus
Color
Gray, Timascus
Lock Type
Frame Lock
Weight
4.22oz/119.5g
Model Name
Shard
Model Number
K1006A4
Designer
Kim Ning


LionSteel ROK Black (Red Aluminum Handle)
RM1,221
RM1,437
This LionSteel ROK EDC folder features a black-finished M390 sintered steel drop point blade with a frame lock locking system and a Rotoblock safety system. The flipper tab can be removed with the proper included key that allows the user to customize how they want to use the knife. Its handle is built from a single piece of aluminum which is light, stylish, attractive and resistant. The aluminum clip provided is of HWAY.L exclusive technology, a lionSTEEL patent, that creates a spring-loaded retractable pocket clip.
Features:
Overall Length: 7.80" (198mm)
Blade Length: 3.27" (83mm)
Blade Thickness: 0.18" (4.5mm)
Blade Steel: M390 Sintered Stainless
Blade Finish: Black (Mil Spec)
Locking System: Frame Lock
Handle: Red Aluminium
Weight: 4.44 oz. (126 g)
Origin: Italy
You can get instant access to all the information regarding your ROK Aluminium, thanks to the exclusive NFC technology provided on the box:
get maintenance information
activate the warranty
discover how your knife was manufactured
contact customer service if needed
See in the official website: https://www.lionsteel.it/n/en/product/1845_var6/rok_a_rb


Spyderco C218GP Opus
RM1,200
RM1,272
Designed by noted German knifemaker Ulrich Hennicke, the Opus is a versatile, all-purpose folding knife that harmoniously balances Hennicke’s distinctive personal design style and Spyderco’s unmistakably classic lines. Its broad, PlainEdge™ blade is crafted from premium CPM® S30V® particle metallurgy stainless steel and features a full-flat grind that offers both strength and low-friction cutting performance. The blade’s oversized Trademark Round Hole™ is fully accessible with either hand and allows quick, positive one-handed opening. An impressive blend of style and function, the handle’s advanced ergonomic design and textured G-10 scales support a variety of grip styles and ensure superior control and comfort, even during prolonged use. Its open-backed construction and skeletonized full stainless steel liners keep the knife’s weight to a minimum while providing a sturdy foundation for the high-strength LinerLock mechanism. To allow convenient carry and keep the knife poised for immediate access, the Opus features a four-position hourglass clip that supports both left and right-side tip-up and tip-down carry.
Features:
Overall Length: 8.84" (225 mm)
Blade Length: 3.75" (95 mm)
Steel: CPM S30V
Closed Length: 5.09" (129 mm)
Edge Length: 3.53" (90 mm)
Weight: 4.2 oz (119 g)
Blade Thickness: 0.118" (3.0 mm)
Handle: G-10
Clip Position: Ambi
Tip Carry Position: 4-position
Lock Type: LinerLock
Grind: Full-Flat
Origin: Japan
See in the official website: https://www.spyderco.com/catalog/details/C218G/1071


Fallkniven F1X Survival Fixed Blade
RM1,199
Fallkniven X-knife is the strongest, sharpest and safest stainless steel knife in production. It is designed to withstand all the stresses applied by the human hand, in other words, it is virtually indestructible. However, you should be careful with the knife and that used as intended, namely as a sharp precision tool.
The basis of the X-knife’s strength lies in the laminated cobalt steel, and also in the well-thought-out construction in which break zones have been eliminated. Together with the hand-shaped convex edge, the X-knife is a concept that beats everything else in the world in terms of your safety and comfort.
A safe knife sheath is very important because the knife will spend most of its time in the sheath. The design of the sheath determines the access to the knife, and hereFallkniven has really put all the efforts in order to get a safe sheath that allows easy access to the knife. The sheath has both a transport lock (the folding bracket with a strap) and a working safety detail that allows the knife to be in place until you decide to use it. It is a bit a belt-and-braces approach, but safety comes first – a lost knife is of no use. The transport lock will, therefore, allow the knife to be fastened tip-up or tip-down on the body or on your equipment without any risk.
Features:
Overall Length: 8.5"
Blade Length: 4" satin finish
Blade Thickness: 5mm
Steel: Laminated Cobalt
Hardness (HRC): 60
Edge: Convex
Handle Material: Black Textured Thermorun
Sheath: Black Zytel
Weight: 222g (Knife only)
Full, extended tang
Lanyard Hole
Country of Origin: Sweden
See in the official website: https://fallkniven.se/en/knife/f1x/
A same steel model review below:


Zero Tolerance 0707
RM1,190
If you are finding the perfect balance between big and small, then the ZT0707 is the correct choice with its premium looks and cutting performance. Its sleek profile is comfortable in the hand, while also keeping a low profile in the pocket. Yet its stonewashed finished drop point blade offers a substantial edge for most cutting tasks and also helps hide use scratches. In addition, for a first in the Zero Tolerance lineup, you can access the blade with ZT's Tuned Detent System (TDS™), which allows the knife to be opened even with pressure on the lock bar. A reversible extra-deep-carry pocket clip, partially machined carbon fiber handle scales, and CPM 20CV blade steel with a full-width flat grind for precision slicing ability round out this feature-packed ZT innovation.
Features:
Made in the USA
Titanium Frame Lock, Hardened Steel Lock Bar Insert
Reversible Extra-Deep-Carry (Right/Left, Tip-up)
Steel: CPM 20CV
Handle: Partially 3D-Machined Carbon Fiber; Titanium Back
Blade Length: 3.5 in. (8.9 cm)
Closed Length: 4.6 in. (11.7 cm)
Overall Length: 8.25 in. (21 cm)
Weight: 2.3 oz. (68 g)
See in the official website: https://zt.kaiusa.com/0707.html


Kansept K1007A4 Accipiter Timascus
RM1,159
DESIGN
The Accipiter is the first front flipper in the Kansept product line. Accipiter K1007A4 is equipped with an ergonomic titanium handle with timascus inlay on the front side. Its stonewash-finished drop point blade is made from dependable S35VN steel. The blade front flipper tab offers quick blade deployment with a reinforced frame lock for strong blade lock up. A comfortably contoured timascus pocket clip completes the outstanding design.
FEATURES
CPM-S35VN drop point blade steel gives a tough blade with excellent edge retention.
Ergonomic titanium handle with timascus inlay for a smooth gripping surface that is comfortable in your pocket or hand.
Ceramic ball bearing offers smooth flip opening
Timascus Pocket Clip
SPECIFICATIONS
Overall Length
8.3''/210mm
Blade Length
3.5"/90mm
Blade Thickness
0.11''/3.0mm
Blade Material
CPM-S35VN
Blade Style
Drop Point
Blade Grind
Flat Grind
Blade Finish
Stonewashed
Handle Material
Titanium and Timascus
Color
Black, Blue Timascus
Lock Type
Frame Lock
Weight
4.76oz/135g
Model Name
Accipiter
Model Number
K1007A4
Designer
Kim Ning


Zero Tolerance 0452CF
RM1,084
Based on an award-winning design 0454, the same size as the original, but with a carbon fiber front scale and stonewashed titanium back. Featuring S35VN with a two-tone finish blade, this frame lock folder opens with KVT ball-bearing system. 5-spoke pivot hardware with the two-tone finish and a deep-carry pocket clip.
Features:
Made in the USA
Based on the award-winning 0454
Manual open, KVT ball-bearing system
Frame lock
Reversible (left/right), deep-carry clip
Steel: S35VN, stonewashed & satin finish
Handle: Carbon fiber front, titanium back, stonewashed finish
Blade Length: 4.1 in. (10.4 cm)
Blade Thickness: 0.156 in. (0.396 cm)
Closed Length: 5.2 in. (13.2 cm)
Overall Length: 9.3 in. (23.6 cm)
Weight: 4.3 oz. (122 g)
See in the official website: https://zt.kaiusa.com/0452cf.html


Victorinox Outdoor Master Mic L Fixed Blade Knife 4.2261
RM1,056
RM1,320
Set sparks flying with the Outdoor Master Mic L knife. Not only does the full tang design give optimal strength as the blade runs seamlessly through the handle of super-tough Micarta scales. The drop-point blade has been crafted with an easy to resharpen Scandi grind, and the neat protective Kydex sheath gives ultimate protection. The Kydex sheath is compatible with the Tek-Lok System. All in all, this is a knife that means business, providing power, precision and versatility.
Features:
Overall Length: 220 mm
Blade Length: 100mm
Blade Thickness: 4mm
Height: 32 mm
Weight: 220 g
Scale Material: Micarta
Package Includes:
Victorinox Outdoor Master Mic L Fixed Blade X 1
Kydex Sheath X 1
Fire Starter with Lanyard X 1
See in the official website: https://www.victorinox.com/global/en/Products/Swiss-Army-Knives/Garden--Sports/Outdoor-Master-Mic-L/p/4.2261


Kansept K1028A2 Bulldozer Gray Titanium
RM1,029
DESIGN
Designed by Kim Ning, this K1028A2 Bulldozer is a front flipper with a CPM-20CV Sheepsfoot blade. Its gray anodized titanium handle has a Timascus clip. The ceramic ball bearings offer an easy opening and smooth closing.
FEATURES
Gray anodized titanium handle scales for a sturdy feel.
Flat ground and black TiCN coated CPM 20CV steel blade for high-performance edge retention.
Timascus pivot collars and pocket clip.
Front Flipper deployment.
SPECIFICATIONS
Overall Length
8.2"/208.6mm
Blade Length
3.53"/89.67mm
Blade Thickness
0.14"/3.5mm
Blade Material
CPM-20CV
Blade Style
Sheepsfoot
Blade Grind
Flat
Blade Finish
Black TiCn
Handle Material
Titanium
Color
Gray
Lock Type
Frame Lock
Weight
4.48oz/127g
Model Name
Bulldozer
Model Number
K1028A2
Designer
Kim Ning


Kansept K1019A2 Hazakura Titanium Timascus Insert
RM1,009
DESIGN
Designed by Max Tkachuk, a Ukrainian graphic and industrial designer who uses his experience and skills to create functional and aesthetic knives. In his work, he is guided by the principle "less is more". This Hazakura is a lightweight and compact EDC knife inspired by tantō. At the same time, its premium CPM S35VN blade is long enough for the most diverse tasks. This knife combines the aesthetic of antique tantō and contemporary materials.
FEATURES
Ergonomic titanium handle with timascus insert for a smooth gripping surface that is comfortable in the pocket or hand.
CPM-S35VN blade steel provides a tough blade with excellent edge retention.
Slender design combines aesthetics and utility.
SPECIFICATIONS
Overall Length
8.12"/206.2mm
Blade Length
3.54"/90mm
Blade Thickness
0.118"/ 3.0mm
Blade Material
CPM-S35VN
Blade Style
Tanto
Blade Grind
Flat Grind
Blade Finish
Stonewashed
Handle Material
Titanium + Timascus
Color
Gray+Timascus
Lock Type
Frame Lock
Weight
3.5oz/99g
Model Name
Hazakura
Model Number
K1019A2
Designer
Max Tkachuk


LionSteel SR11 Black (Red Aluminum Handle)
RM1,009
RM1,192
Designed by Molletta, the LionSteel SR11 is an EDC folding knife manufactured with the exclusive SOLID® knife technology. It is light and strong, built with a black-finished Sleipner steel drop point blade with a frame lock blade locking system and Rotoblock security system. The opening and closing movements feature the exclusive IKBS ball bearing system. The handle is made from a 4D machined unique piece of Ergal aluminum and is provided with a stainless steel clip that can fit on both sides of the frame. The clip-fixing screw is equipped with a carbide tungsten glass-breaker.
Features:
Overall Length: 8.31" (211mm)
Blade Length: 3.7" (94mm)
Blade Thickness: 0.18" (4.5mm)
Blade Steel: Sleipner Steel
Blade Finish: Black (Mil Spec)
Locking System: Frame Lock
Handle: Red Aluminium
Weight: 5.15oz. (146 g)
Origin: Italy
See in the official website: https://www.lionsteel.it/n/en/product/1786_var6/sr11a_rb


Kansept K1006A3 Shard Carbon Fiber Titanium
RM979
DESIGN
The K1006A3 Shard is outfitted with a bead blasted titanium handle with carbon fiber overlays and a stonewashed Wharncliffe blade. The blade is made from premium CPM-S35VN stainless steel with a flipper opener and elongated thumb hole to accommodate easy ambidextrous deployment. The contoured frame lock handle is made from 6AL4V titanium for maximized strength and durability. It features a 3D milled Timascus pocket clip for both aesthetics and easy carry.
FEATURES
CPM-S35VN blade steel offers a tough and durable blade with excellent edge retention.
Chamfered titanium handles with carbon fiber for a smooth gripping surface that is comfortable in the pocket or hand.
Ceramic ball bearing offers smooth flip opening
Timascus 3D milled titanium pocket clip
SPECIFICATIONS
Overall Length
7.96"/202.1mm
Blade Length
3.50''/88.9mm
Blade Thickness
0.15''/4mm
Blade Material
CPM-S35VN
Blade Style
Wharncliffe
Blade Grind
Flat Grind
Blade Finish
Satin
Handle Material
Titanium, Carbon Fiber
Color
Black and Grey
Lock Type
Frame Lock
Weight
4.08oz/115.66g
Model Name
Shard
Model Number
K1006A3
Designer
Kim Ning


Spyderco C177GP Roc G-10 (Black)
RM930
Designed by custom knifemaker Serge Panchenko, the Roc combines an unusual cleaver-style blade with a gracefully curved handle and a sturdy LinerLock mechanism to create a uniquely functional cutting tool that challenges convention. Precision ground from VG-10 stainless steel, the Roc’s blunt-tipped, PlainEdge™ blade features a low-profile matte gray finish and a saber grind that balances high-performance edge geometry with the strength and heft of a full-thickness spine. A long section of jimping (textured grooves) on the blade’s spine provides a solid purchase for the user’s thumb, and an easily accessible Trademark Round Hole™ ensures swift, positive one-handed opening with either hand.The Roc’s handle combines full skeletonized stainless steel liners with textured G-10 scales and an open-backed construction that reduces weight and simplifies cleaning and maintenance. Its thick liners also form the foundation of the knife’s sturdy LinerLock mechanism, which includes a Bob Terzuola-inspired concave lock ramp on the blade’s tang. To ensure convenient carry and immediate access, the Roc features a reversible deep-pocket wire clip attached to the butt end of the handle to offer left or right-side tip-up carry.
Features:
Overall Length: 7.76" (197mm)
Blade Length: 3.07" (78mm)
Steel: VG-10
Closed Length: 4.69" (7.76mm)
Edge Length: 2.77" (70mm)
Weight: 4.2oz (119g)
Blade Thickness: 0.118" (3.0mm)
Handle: G-10
Clip Position: Ambi
Tip Carry Position: Tip-Up
Lock Type: LinerLock
Grind: Saber
Origin: Japan
See in the official website: https://www.spyderco.com/catalog/details/C177G/938


Cold Steel SR1 Tanto Folding Blade (S35VN)
RM929
RM1,037
The Cold Steel SRK (Survival Rescue Knife) has been a proud flagship blade in our line-up for over 25 years. The knife of choice for many of our brothers and sisters in the military, it remains the standard issue fixed blade of the Navy SEALs during BUDS training to this day. It’s little wonder then, that when we tasked custom knife maker Andrew Demko with developing a new high-end tactical folding knife for military application, that he took inspiration from the legendary SRK! The SR1 features Andrew’s signature minimalist style, with no unnecessary flourishes or embellishments, just pure functional, no-nonsense, practical design. The SR1’s heavy duty blade is made to put to work. Crafted from 5mm thick American CPM-S35VN premium powdered steel, it’s a heavy duty work horse, designed for the harshest and most unforgiving environments. A good blade needs a good handle, so the SR1’s handle is made from premium G-10 with heat treated nested steel liners. With an integrated lanyard hole and coarse-textured surface for a secure grip even in cold, wet conditions, and expertly contoured to allow for a comfortable and safe grip even while wearing heavy gloves. For added reliability and peace of mind, we equipped the SR1 with our world-famous Tri-Ad® locking mechanism - proven time and time again to weather even the worst abuse, with unparalleled shock and impact resistance - making this knife the ideal choice for a survival rescue blade intended for our nation’s warrior elite!
Features:
Weight: 7.2 oz.
Thickness: 4.8mm
Blade Length: 4”
Handle: 5 3/8” long OD Green Colored G-10
Steel/Material: CPM-S35VN
Overall: 9 3/8”
See in the official website: http://www.coldsteel.com/sr1-tanto.html


Kansept K1023B4 Convict Bronze Titanium
RM919
DESIGN
Chris Conaway has been making knives and founded Sheepdog Knives in 2011. Chris designs and makes custom knives that showcase his top-of-the-line creativity and attention to detail.
The Kansept Convict designed by Sheepdog Knives is a stout and burly design for all tasks. This frame lock folder is built with a Damascus sheepfoot blade and a bronze anodized titanium handle. The blade shape and straight edge make a great cutting knife for all tasks and self-defense. The handle has a clean, comfortable design that accommodates a variety of grip styles. The Ball Bearing system provides a smooth opening.
FEATURES
Damascus blade steel provides a tough blade with excellent edge retention.
Ergonomic bronze anodized titanium handle for a smooth gripping surface that is comfortable in the pocket or hand.
Ceramic ball bearing offers smooth flip opening
SPECIFICATIONS
Overall Length
7.52"/191.1mm
Blade Length
3.3"/84mm
Blade Thickness
0.14"/3.5mm
Blade Material
Damascus
Blade Style
Sheepfoot
Blade Grind
Flat Grind
Blade Finish
Damascus
Handle Material
Titanium
Color
Bronze
Lock Type
Frame Lock
Weight
4.06oz/115g
Model Name
Convict
Model Number
K1023B4
Designer
Sheepdog Knives


Zero Tolerance 0450
RM903
Features:
Made in the USA
Based on the award-winning 0454
Manual open, KVT ball-bearing system
Frame lock
Reversible (left/right), deep-carry clip
Steel: S35VN, stonewashed & satin finish
Handle: Titanium, stonewashed finish
Blade length: 3.25 in. (8.3 cm)
Closed length: 4.1 in. (10.4 cm)
Overall length: 7.4 in. (18.8 cm)
Weight: 2.9 oz. (82.2 g)
See in the official website: https://zt.kaiusa.com/0450.html
Some of our customer(s) review(s):